About this item

   Pull-out design: The pull-out design kitchen faucet is designed to keep your kitchen room simple and fresh and easy to match most sinks. The flexible nozzle provides a wide range of motion, allowing you to use water directly wherever you need it.

Pull down faucet for kitchen sinks: 16.7" high faucet, 8" spout, 23" pull out hose, pull down sprayer, black stainless steel finish Single handle high arc kitchen faucet to keep your kitchen room simple and fresh.

Multi-functional spout effect: 2 ways spray setting, water flow supply. Provides stable water pressure for easier cleanup.

Temperature and water flow control: Single handle control, high arc 360 degree rotating spout provides full cleaning access and the nozzle always retracts back to the spout after each use. The single handle can be set on the right or left side as desired.

Easy to install and durable: All kits are included in the package and can be easily installed according to the instructions, no plumber required, DIY in less than 25 minutes. Durable metal construction with lead-free waterways and ceramic cartridges for a lifetime of leak-free performance Superior corrosion and rust resistant finish.

Service: We guarantee free return and exchange for quality problems. If there is any problem, please contact us and we will solve it immediately.

1: Remove the entire accessory, the inlet pipe, and the silicone gasket fixing nut

2: Put one of the inlet pipes through the opening and through the counter top

3: Screw the inlet pipe already through into the water inlet below the faucet and tighten it properly

4: Remove the entire tooth tube through the water pipe that has been screwed into the water inlet of the faucet

5: Put the second water pipe through the entire tooth tube and screw it into the other inlet below the faucet

6: Align the pipe with the bottom of the faucet and tighten it properly to adjust the faucet position and then tighten the big nut to fix it

Before connecting the water inlet hose to the indoor water supply pipe, pay attention to the following points:

1: Flush the pipe

2: No burrs on the end of the water supply pipe

3: The use of raw material tape and any other sealing materials is prohibited at both ends of the water inlet hose

4: water inlet hose hexagonal nut connected to the water supply pipe, be careful not to use excessive force, otherwise it will damage the inlet pipe; and to ensure that the hose is not tied or severely bent during the installation process, so as not to damage the hose structure.

Product information